Pixhawk 6C + M8N GPS + PM07
Detailní popis produktu
Specifikace:
Processors & Sensors
FMU Processor: STM32H753
-
32 Bit Arm® Cortex®-M7, 480MHz, 2MB flash memory, 1MB RAM
IO Processor: STM32F103
-
32 Bit Arm® Cortex®-M3, 72MHz, 64KB SRAM
On-board sensors
-
Accel/Gyro: ICM-20649 or BMI088
-
Accel/Gyro: ICM-42688-P
-
Accel/Gyro: ICM-42670-P
-
Mag: BMM150
-
Barometer: 2x BMP388
Voltage Ratings:
-
Max input voltage: 6V
-
USB Power Input: 4.75~5.25V
-
Servo Rail Input: 0~36V
Current Ratings:
-
Telem1 output current limiter: 1.5A
-
All other port combined output current limiter: 1.5A
Dimensions
-
Flight Controller Module: 38.8 x 31.8 x 14.6mm
-
Standard Baseboard: 52.4 x 103.4 x 16.7mm
-
Mini Baseboard: 43.4 x 72.8 x 14.2 mm
Weight
-
Flight Controller Module: 23g
-
Standard Baseboard: 51g
-
Mini Baseboard: 26.5g
-
16- PWM servo outputs
-
R/C input for Spektrum / DSM
-
Dedicated R/C input for PPM and S.Bus input
-
Dedicated analog / PWM RSSI input and S.Bus output
4 general purpose serial ports
-
3 with full flow control
-
1 with separate 1.5A current limit (Telem1)
-
1 with I2C and additional GPIO line for external NFC reader
2 GPS ports
-
1 full GPS plus Safety Switch Port
-
1 basic GPS port
-
1 I2C port
1 Ethernet port
-
Transformerless Applications
-
100Mbps
1 SPI bus
-
2 chip select lines
-
2 data-ready lines
-
1 SPI SYNC line
-
1 SPI reset line
2 CAN Buses for CAN peripheral
-
CAN Bus has individual silent controls or ESC RX-MUX control
2 Power input ports with SMBus
-
1 AD & IO port
-
2 additional analog input
-
1 PWM/Capture input
-
2 Dedicated debug and GPIO lines
Operating temperature: -40 ~ 85°c
Doplňkové parametry
Kategorie: | FC |
---|---|
Záruka: | 2 roky |
Hmotnost: | 2 kg |
Položka byla vyprodána… |
Buďte první, kdo napíše příspěvek k této položce.
Přidat komentář